TOPS Scaffold & Shoring Supply

Scaffold Accessories

240112-12" 8LBS

240120-20" 11LBS

241112-12" 11LBS

241124-24" 14LBS

240220

Power coat finish

Weight: 11lbs (5kg)

242030

Ranges from 20" to 30"

Finish: powder coat

Weight : 12.2lbs (5.5kg)

Side brackets are used to extend work area outward to make the working platform wider. We have different side brackets for

1,2 or 3 planks respectively. Both powder coat and hot dip galvanized finishes are available.

NOTE: Side brackets and End brackets are not intended for storage of materials.

Horizontal diagonal braces (Plan braces)

Horizontal diagonal braces offer corner to corner diagonal stability to

scaffold towers that are cross braced.

Made of 1” OD x 0.07 ” pre-galvanized tube.

Code	Span between frames	Width of frame	Weight
220071	7’	5’	6.8lbs(3kg)
220100	10’	5’	9lbs(4.1kg)

Goosers

Goosers are horizontal diagonal braces with special end connectors to

attach to frame legs

Heavy duty, and made of 1.69” OD x 0.095 ” tube. Powder coat or hot

dip galvanizedfinish.

Code	Span between frames	Width of frame	Weight
227236	7’	3’	15.5 lbs(6.9kg)
227248	7’	4’	16lbs (7.3kg)
227260	7’	5’	16.8lbs (7.6kg)

Internal stairway unit

Our internal stairway with handrails provide a safe method of climbing

any tower.They can be assembled at the same time as the tower or

after the tower has been erected. The stairway has 22” wide stair

tread and landings at one end for use with 5’ high frames, or with

ring system.

Finished: All Aluminum.

Code	Description	Weight
260705	Stairway 7’x5’	50LBS/22KG
260715	Outer Handrail	18LBS/8KG
260725	Inner Handrail	13LBS/6KG

Guard rail posts

The guardrail posts attach to scaffold frames and provide

attachment points for both top rail and mid rails.

Guard rails

Made of 1” OD x 0.07 ” tube (1-1/4” OD for 10’ guard rail).

Code	Hole to hole	Weight
222030	30”	1.9 LBS (0.86KG)
222060	5’	3.62LBS (1.64KG)
222084	7’	5.0LBS (2.27KG)
222120	10’	9.3LBS (4.21KG)

222150

Weight:

6LBS/2.5KG

250030

Outriggers increase the base dimension to

stabilize mobile scaffold tower. They clamp

solidly on to the frames and allow the rolling

tower to be built higher.

Weight: 22LBS(9.98KG)

222000

Provides guard rail protection

where needed on open ends of

platforms.

Weight: 12.6 LBS (5.7KG).

250016

With same size plate as base

plate, it provides footing for

frame assembly on uneven and

angled surfaces. Four nail holes.

250006

6”X6” base plate is to provide

footing for frame assembly on

level surfaces. Has four nail

holes on the plate.

Finish: powder coat or hot dip galvanized.

Weight: 2.2 LBS. (1KG)

201138

Coupling pins

9”long X 1-3/8”OD or 1.412”OD

With 1” collar.

Finish: electro plated.

Weight: 1.11 LBS /0.50KG

NOTE : guardrail systems shall be installed along all open sides and ends of platforms according to OSHA Regulation.

Lock and pins

Fast Lock, Flap Lock, Flip Lock, Drop Lock, Rivet Lock, C Lock, V Lock.

Toggle pin pig tail, spring clip, split roll pin, Rivet pin, Snap pin.

Flip Lock Drop Lock V Lock C Lock Fast Lock Canadian

Lock

290110 192010 190247 290100 290050 290080

The Scaffold Caster series is specifically designed for use on

scaffolding. Utilizing a deep saw tooth swivel lock and brake

disc design, the actuator handle easily locks the swivel and

wheel simultaneously..

250108

Features:

Swivel: 2 rows of ball bearings in machined and

hardened upper and lower raceways.

Legs: heavy gauge formed steel plate.

Kingpin: bolt and nut with drop forged raceway

Wheel bearing: Roller, ball bearing.

Wheel Type: Rubber/Steel/Phenolic.

Finish: Zinc plated.

191156

Code	Description	Capacity	Weight
250108	Rubber/Steel housing	600lbs	12lbs (5.5kg)
191156	8” wheel, phenolic	900lbs	12.5lbs(5.67kg)
191187	8” wheel, phenolic & Jack	1,100lbs	18lbs (8.1kg)

191187

Hoist arm wheels

Ductile iron, with drip forged swivel latch hooks. Entire assembly

is electro plated for rust protection. Hook is hot drop forged to ensure

the capacity.

Safety working load is 150lbs.

Available size : 10” and 12”.

Rope diameter : 1” max.

Weight : 13.3 lbs (6.03kg) for 10” and 14.6lbs (6.6kg) for 12”.

250510

Hoist arms.

Heavy duty model : 250500

Powder coat or hot dip galvanized finish.

Capacity: 250lbs

Weight : 34.8lbs (15.8kg).

Swivel head model: 250505

Swivel head rotates 360° and closed steel loop for

wheel hook.

Coated Plywood

Cross-bonded birch or poplar veneers coated with 120g/m2 or higher grade reinforced phenolic resin film at both sides, with edges

and sides sealed all around in order to meet higher requirements of wood-based panels’ surface characteristics in concrete formwork

and construction sites where alum decks are used.

All coated plywood we supply is manufactured of high quality veneers and phenolic surface film from world –wide quality

manufacturers.

Thickness : 12, 15,18,20,21 and others in mm.

Number of layer: from 5 to 21, subject to the required thickness.

Surface option:

Wire mesh pattern to offer skid-resistance.

Birch Poplar Rice surface Wire mesh surface